Samarium (Sm)

  • Samarium (III) Fluoride (SmF3)
    Samarium (III) Fluoride (SmF3), or samarium trifluoride, is a crystalline ionic compound which is slightly hygroscopic. It is widely used as Laboratory reagents, optical fiber doping, laser materials, fluorspar light-emitting materials, optical fiber, optical coating materials, and electronic materia
  • Samarium (Sm) Evaporation Materials
    Samarium is a chemical element with symbol Sm and atomic number 62. It is a moderately hard silvery metal that slowly oxidizes in air. Being a typical member of the lanthanide series, samarium usually assumes the oxidation state +3. Compounds of samarium(II) are also known, most notably the monoxide
  • Samarium (Sm) Metal
    Material Type: Samarium Metal Melting Point (C): 1072 C Symbol: Sm Boiling Point (C): 1900 C Atomic Number: 62 Density: 7.54 gm/cm3 Samarium metal is lustrous, brittle, silvery-yellow metal, tarnishes in air, relatively hard. It has a hardness and density similar to those of zinc. Samarium Metal is
  • Samarium (Sm) Sputtering Targets
    Samarium is a chemical element with symbol Sm and atomic number 62. It is a moderately hard silvery metal that readily oxidizes in air. Being a typical member of the lanthanide series, samarium usually assumes the oxidation state +3. Compounds of samarium(II) are also known, most notably the monoxid
  • Samarium Acetate (Sm(C2H3O2)3•4H2O)
    Molecular formula: Sm(C2H3O2)34H2O Molecular Weight: 399.37 CAS NO. : 17829-86-6 Appearance properties: canary yellow crystalline powder; freely soluble in water, deliquescent; sealed preservation. Purpose: to manufacture additives of alloy materials and chemical reagents, etc. Package: vacuum packa
  • Samarium Cobalt (Sm/Co5) Sputtering Targets
    Material Notes Samarium Cobalt Sputtering Targets, Purity is 99.9%;Circular: Diameter = 14inch, Thickness = 1mm; Block: Length = 32inch, Width = 12inch, Thickness = 1mm. Applications Ferroelectric Gate Dielectric For CMOS Features High purity Custom Sizes Available Manufacturing Process Manufacturin
  • Samarium Cobalt (SmCo5) Sputtering Targets
    Material Notes Samarium Cobalt Sputtering Targets, Purity is 99.9%;Circular: Diameter = 14inch, Thickness = 1mm; Block: Length = 32inch, Width = 12inch, Thickness = 1mm.
  • Samarium Fluoride (SmF3) Evaporation Materials
    Samarium(III) fluoride (SmF3) is a slightly hygroscopic solid fluoride. At room temperature, it has orthorhombic structure with space group Pnma a/b/c-YF3 type with lattice constants a = 666,9 pm, b = 705,9 pm, c = 440,5 pm. Above 495 C, it has the rhombohedral LaF3 structure (space group P3cl) with
  • Samarium Nitrate (Sm(NO3)3)
    Samarium Nitrate has specialized uses in glass, phosphors, lasers, and thermoelectric devices. One of the most important applications of Samarium is in cobalt magnets, which have a nominal composition of SmCo5 or Sm2Co17. These magnets are found in small motors, headphones, and high-end magnetic pick
  • Samarium Oxide (Sm2O3) Sputtering Targets
    Samarium Oxide thin films, obtained by pulsed laser deposition and by radio frequency assisted pulsed laser deposition. Three different substrate types were used: silicon, platinum covered silicon and titanium covered silicon. The influence of the deposition parameters (oxygen pressure and laser flu
  •