Molybdenum （Mo）

Managanese Selenide ( MoSe) is an inorganic compound of molybdenum and selenium . Its structure is similar to that of MoS . These compounds are made up of a transition metals and elements of group 16 on the periodic table of the elements . Compared to MoS, MoSe exhibits higher electrical conductivit

Description: AEM is a leading global provider of high quality molybdenum sheet products. AEM offers a wide range of cold rolled sheet product in varying thickness and length and per customer request. As with all of our materials, our sheet begins as metal powder, is pressed into ingots, sintered, an

Molybdenum disilicide (MoSi2, or molybdenum silicide), an intermetallic compound, a silicide of molybdenum, is a refractory ceramic with primary use in heating elements. It has moderate density, melting point 2030 C , and is electrically conductive. At high temperatures it forms a passivation layer

Description: Molybdenum is a lustrous, silvery coloured metal which has an abundance of 1.5 ppm in the earths crust. In many instances, it shows a resemblance to tungsten with which it tends to be paired in the transition series in the periodic table, but their chemistries tend to show more distinct

Molybdenum(IV) telluride is a compound of molybdenum and tellurium with formula MoTe2, corresponding to a mass percentage of 27.32% molybdenum and 72.68% tellurium. It can crystallise in two dimensional sheets which can be thinned down to monolayers that are flexible and almost transparent. It is a

Desciption: Molybdenum Trioxide (MoO3), white / light gray / green powder, shaped like talcum powder, slightly soluble in water, soluble in alkali and acid, high purity, reaction with phosphoric acid can generate phosphomolybdic acid.The main applications for Molybdenum Trioxide is that it is used a

Molybdenum Tube Description: Standard: ASTM B386 Material: Mo-1, Mo-2, 99.95% Density: 9.8~10.20g/cc Application: Molybdenum tube (pipe) can be used at service temperature up to 1,800 degrees. It can be used in components of electron tube, heaters of high-temperature furnaces, thermocouple retainers

Mo-W alloy introduction: Mo-W alloy is one kind of alloy which is composed of molybdenum and tungsten. The manufacturing process of Mo, W alloy is similar to that of molybdenum and molybdenum alloy. Mo, W alloy is made by powder metallurgic method. Mo-W alloy can be processed into rod, plate and wir

TZM Description: TZM Molybdenum is an alloy of 0.50% Titanium, 0.08% Zirconium and 0.02% Carbon with the balance Molybdenum. TZM Molybdenum is manufactured by either P/M or Arc Cast technologies and is of great utility due to its high strength/high temperature applications, especially above 2000F. T

Material Notes Nickel Molybdenum Sputtering Targets, Purity is 99.9%;Circular: Diameter = 14inch, Thickness = 1mm; Block: Length = 32inch, Width = 12inch, Thickness = 1mm. Applications Semiconductor Chemical vapor deposition (CVD) Physical vapor deposition (PVD) display Features Competitive pricing